The new Panel Cutter TruTool 165
cuts polyurethane, polyisocyanurate, X-Flam and now mineral wool core sandwich panels regardless of whether
the panel surface is flat, trapezoidal or corrugated. The machine can handle
diverse applications, ranging from crosscuts and right-angle cuts to interior
cutouts and notches. Even cutouts on pre-mounted panels are easy work for the
new panel cutter.
With a 90 degree adjustable
blade, you can easily and quickly produce right-angled cutouts. Another plus:
as a result of its immersion mechanism, it's possible to start at any location
on the panel without a starting drill hole.
·
Max Panel thickness: 165mm plus crown or 200mm if both surfaces are flat
·
Max individual material thickness:
0.9mm
·
Working Speed: 4mt per minute
· Weight without cable: 9.6kg
The 12 Benefits of the TruTool 165 Panel Cutter
1. No need to flip over panels to cut through up to 165mm thick panels
2. No need to drill pilot holes for cut outs for windows or doors
3. Long blade life in comparison to reciprocation and jigsaw
4. Very low HAV in comparison to reciprocation and Jigsaw
5. No curved cuts so flashings fit first time.
6. High cut quality - excellent for high finish buildings that use architectural panels
7. Rail system prevents marking the panels from the saw movement
8. You can cut over trapezoid profiles with the rail
9. The rail system allows you to join rails together for doing hip cuts easily
10. Factory finish cuts
11. Much lighter & smaller than 350mm circular saws
12. Dust extraction port for your safety